How is the noise of the injection molding machine generated?

2023-07-31


Injection Molding Machine Noise Generation

It is reported that abnormal noise is generated, indicating that parts are damaged or improperly adjusted. The cause should be found out according to the location of the noise for immediate maintenance.

1. Insufficient hydraulic oil in the oil tank, air intake by the oil pump or dirt blockage of the oil filter will cause the oil pump to run out of oil, causing bubbles in the oil to discharge and hit the blades and generate noise. The solution is to check the oil volume. Prevent air inhalation and clean the oil filter.

2. The hydraulic oil has high viscosity and increases flow resistance. It is necessary to replace the suitable hydraulic oil.

3. Due to damage to the bearings or blades of the oil pump or motor, the concentricity deviation of the coupling causes noise, and the concentricity must be adjusted or parts must be replaced. 4, the direction of the valve response failure but the function is still, such as valve core wear, internal leakage, burr blocking, mobile inflexible, solenoid valve due to insufficient current failure will also produce noise. The solution is to clean the valve core, the valve core wear must be replaced with new parts, and the current must be stable and sufficient.

5. Noise occurs when hydraulic components are damaged or oil pipelines are blocked, causing hydraulic oil to flow at high speed.

6, mechanical part failure, bearing wear or mechanical lack of lubricating oil or loose parts, should find out the reason to tighten or replace the parts,

to ensure that there is enough lubricating oil.

Jilin Yuxing Machinery Manufacturing Co., Ltd.



Latest News

More needs?

Our dedicated team is here to help you.

Contact Us

Service Telephone

+86-0434-4227005